Amer General Machining Coolant BF820

       Amer cutting fluid BF820 is a kind of general semisynthetic fluid. The product is designed for cutting and grinding of many metals and does not need the special maintenance even under the quite strict machining condition.  With the ideal stability and excellent machining property, it develops to the preferred product in modern high quality machining industry.

Main Advantages:

       1.Long service cycle --- the stable formula provides the relative long service life.

       2.Extensive application scope --- it can be used for both cutting and grinding, and applies to steel materials, casting steel, stainless steel, aluminum copper alloy etc.

       3.Excellent lubrication performance --- maintaining the good balance of lubrication and cooling, it can prolong the service life of tool and provide the excellent surface finishing degree.

       4.Cleaning performance --- the fine emulsion particles reduce the coolant consumption during the machining process. The super strong permeability can make the cutting fluid enter the cutting position easily and timely remove the chips.

       5.Biological stability --- it can effectively resist to bacteria and fungus and maximally reduce the waste liquid discharging. The product can be used for a long time without the need of adding other high cost additives.

       6.Minimizing the impact on environment --- the cutting fluid can be recovered and waste liquid can be discharged by taking the routine technology and equipment.

Main Application:    

      It's extensively used for machining of stainless steel, mould steel, casting steel, carbon steel, alloy steel, aluminum copper alloy and many other materials.

     It can be used for turning, milling, drilling, hinging, grinding, boring, tapping and many other machining processes.

     It can be widely used for machining center, digital controlled machine tool and other machining equipment.

Precautions:    

        Client can choose the proper proportion of adding water based on the machining materials to reduce wastes. In general, the higher the concentration is, the better anti-rust and lubrication effect will be.

        The appearance of original liquid will lightly turn yellow in case of being stored for a long time, which belongs the normal phenomenon and will not affect the machining effect.

        Please do not mix it with other cutting fluid for using. When supplementing fluid, please add the original liquid and water as per the proportion. Do not directly supplement water.