Amer Multi-effect Forming Oil C70A

Performance Overview:

The product is the oily lubricant specially researched and developed steel sheet

stamping and forming technology. It adopts the refined mineral oil and adds the

preservative, anti-oxygen, extreme pressure agent, anti-wear agent and many

other special effect additives. It's widely used for deep drawing and machining of

small area of galvanized sheet, steel, cold-rolled sheet etc.

Main Advantages:

l It contains the extreme pressure anti-wear additives and can extend the service life of mould;

l With the moderate viscosity, it can provide the strong oil film strength;

lSafe and environmental-friendly, it does not contain any hazardous chemicals

(including Chloroalkanes C10-13) and can protect the users' health;

Main Application:

The product is mainly used for the cutting

of cold-rolled sheet with the thickness of 1-3mm and the reaming, gun drilling, broaching,

 deep drilling, tapping and finely blind hole drilling and other heavy load machining of hard alloy steel. 

Precautions:

l It shall be stored indoor. If store it in open air, the barrel shall be placed horizontally to avoid water invading

or the marks on barrel being immersed.

l It's strictly prohibited mixing the product with foreign matters otherwise it will lead to oil product getting bad or invalid.

l Do not mix it with other oil products to prevent the performance getting poor.

Typical Characteristics: