Amer Long-life Synthetic Oil AS for Screw Air Compressor

      This series of products are carefully prepared from high-quality efficient Class IV and V synthetic base oil and special additives with such functions as anti-rust, anti-wear and anti-oxidation, providing an ultra-long oil service life and effective lubrication protection for screw air compressors working under high temperature and harsh working conditions. Its quality conforms to ISOL-DAH specification.

Major Advantages:

         1.Keep the screw clean for a long time: prepared with fully synthetic formula, it has excellent oxidation stability, and its oxidation resistance index (rotary bomb oxidation test) is 2-3 times that of competitive products; when used under demanding conditions, it is superior to mineral oil products in some characteristics; it can keep the screw clean for a long time and inhibiting sludge and carbon deposits; it is specially developed to provide reliable, effective and safe lubrication over long working periods.

          2.Trouble-free operation: high-quality efficient Class IV and V synthetic base oil has excellent oxidation resistance; coupled with special additives, it has very little color change, small evaporation loss and low oil consumption after long-term use.

          3.Safe exhaust pipe: the heat generated by the mixture of rust particles scattered in the carbon deposit in the pipeline along with the compressed air can lead to exothermic reaction which can cause fire or explosion, this series of products can effectively prevent such incidents.

        4.Reduced maintenance costs and downtime: high-quality efficient Class IV and V synthetic base oil and highly effective additives can form an effective lubricating protective film on the metal surface, thus preventing wear on parts at both high and low starting temperatures.

         5.Comprehensive protection: with optimal rust and corrosion resistance, it can protect the machine from rust and corrosion caused by moisture immersion, especially in the case of intermittent operation during shutdown.

Main Application:

       It is applicable to the lubrication of rotary (screw) air compressors under various loads with exhaust temperature not greater than 120℃. It is recommended to used for oil-impregnated rotary vane and screw compressors such as Hitach, Mitsui, Seiki, Kogyo, Hoduetsu, Komatsu, etc. Its service life is up to 6,000-8,000 hours or more. It has unbeatable advantage in cost performance. It is recommended to use 32# oil for screw air compressors below 100KW.

Precautions:

        1. The air filter shall be purged or replaced after used for 4,000H in special environments (harmful gas, high dust, etc.).

       2. If the oil is deteriorated and replaced, it shall be cleaned with cleaning agent, the cleaning agent shall be drained as much as possible. Finally, new oil shall be added after rinsing with a small amount of new oil, so as not to affect the service life of air compressor oil.

       3. The oil circuit system must be cleaned after 2 to 3 times of normal oil replacement.

Typical Data: